This page provides products information complied medical device requirements in EEA & UK.

MOR-1MD

Micromanipulator set
  1. EEA & UK
  2. Products
  3. MOR-1MD
MOR-1MD: Micromanipulator set
for Nikon Ti2: MOR-1MD + NN-H-5MD
for Evident IX73: MOR-1MD + NO-PIX-5MD
for Carl Zeiss Axio Observer 3/5/7: MOR-1MD + NZ-24MD
for Leica DMi8: MOR-1MD + NL-18MD
MICROMANIPULATOR SET

High Precision and Easy Control

Oil hydraulic micromanipulator offers smooth movement and no vibration so the micropipette tip accurately approaches the target. Compact design and simple setup. Hanging joystick for 3D micromanipulation. Optimized design to reduce stress from long hours of operation. Motorized manipulator offers smooth and safe operation by separating coarse movement from initial fine positioning of the micropipette within the field of view.

  • A microscope, injection holder, injector and mounting adaptor are not included.
Items included
  • Iron plate × 2
  • Universal joint × 2
  • Power cord × 1
  • Hex wrench × 2
  • Spare fuse (inside of fuse holder) × 1
Hydraulic micromanipulator
(Fine movement)		 Drive source Oil hydraulic
Movement range
  • Knob operation: Max. 10 mm (Scale: 0-10)
  • Joystick operation: Max. 2 mm
Displacement by knob
  • One full turn: 250 µm
  • Minimum graduation: 2 µm
Dimensions
  • Control unit: W70 × D177 × H178 mm
  • Drive unit: W70 × D40 × H87 mm
Weight
  • Control unit: 1.76 kg
  • Drive unit: 168 g
Motorized manipulator
(Coarse movement)		 Drive source DC motor
Movement range Max. 22 mm
Dimensions
  • Controller: W70 × D100 × H120 mm
  • Drive unit: W85 × D112 × H144 mm
  • Control unit: W204 × D135 × H62 mm
Weight
  • Controller: 530 g
  • Drive unit: 591 g
  • Control unit: 1.05 kg
Driving speed (In each X-/Y-axis)
  • When the high-speed button is in use: 1.4 mm/s
  • Speed adjusting knob [at maximum]: 0.7 mm/s
  • Speed adjusting knob [at minimum]: 0.1 mm/s
Driving speed (Z-axis)
  • When the high-speed button is in use: 2.8 mm/s
  • Speed adjusting knob [at maximum]: 1.4 mm/s
  • Speed adjusting knob [at minimum]: 0.2 mm/s
Working voltage AC 100–240 V, 50/60 Hz
Power consumption Approx. 10 W
Select model based on your microscope.
Supplier Microscope Mounting Adaptor
Nikon ECLIPSE Ti2 NN-H-5MD
ECLIPSE Ti NN-H-4MD
ECLIPSE Ts2R NN-WMD
Evident IX73/83 NO-PIX-5MD
IX71 NO-PIX-3MD
Carl Zeiss Axio Observer 3/5/7 NZ-24MD
Axiovert 5 NZ-24MD
Leica DMi8 NL-18MD
Reference No. 031

Related Products